List of associated parts used in the KADE encoder.

-------------------
AVR

AT90USB162
1 ea
http://minimususb.com/

  or

ATMEGA32U2
1 ea
http://minimususb.com/

-------------------
Pin header, 12 position, .1" (2.54mm) spacing

68000-112HLF (Straight)
2 ea
FCI
http://www.digikey.com/product-search/en?keywords=68000-112HLF

  or

22-03-2121 (Straight)
2 ea
Molex

  or

1-103670-1 (Shrouded)
2 ea
TE Connectivity / AMP

  or

6-104362-1 (Shrouded)
2 ea
TE Connectivity / AMP

  or

22-05-2121 (Right angle -- use with 4-wire harness below for low-profile installation)
2 ea
Molex

-------------------
Pin socket, 12 position, .1"/2.54mm terminal spacing

	
M20-7821242
2 ea
Harwin Inc
http://www.digikey.com/product-search/en?keywords=M20-7821242

  or

(Alternate configuration with pin headers soldered to the AVR)
4 wire .100 header wiring harness
http://www.paradisearcadeshop.com/jamma-harnesses/301-4-wire-100-header-wiring-harness.html
6 ea.
Paradise Arcade Shop 

-------------------
Screw terminals, 2 position, 5mm terminal spacing

OSTTC020162
5 ea
On Shore Technology Inc
http://www.digikey.com/product-search/en?keywords=OSTTC020162

-------------------
Screw terminals, 3 position, 5mm terminal spacing

OSTTC030162
5 ea
On Shore Technology Inc
http://www.digikey.com/product-search/en?keywords=OSTTC030162